If you’re looking to build efficiently, safely and sustainably, prefabrication construction could be the answer. With components that can be assembled on-site much faster than traditional construction methods, prefab construction offers advantages that are hard to ignore. In saying that, prefab isn’t suitable for every project. We’ve outlined some important factors you should weigh up before deciding if prefab will be beneficial for your build.
At Plungie, we’re obviously fans of prefab. It’s an integral part of our business and has allowed us to disrupt an outdated pool-building industry. Here are just some of the advantages of prefab construction that we’ve leveraged — we think it’s time builders and homeowners take notice too.
Prefab structures are generally mass-produced, so companies can take advantage of economies of scale to reduce overall project costs. Because construction takes place off-site in a controlled environment, there’s also less chance of variations or delays. As such, your project is more likely to stay on budget when compared to a traditional build.
Off-site construction is the ultimate time-saver. If planned well, the prefab structure can be manufactured while the construction site is being prepared, killing 2 birds with 1 stone. Once the prefab structure arrives on site, it can also be assembled quickly. The Modular Construction: from projects to products report by McKinsey & Company found that prefab reduces overall project timeframes by up to 50%. Less time on-site means reduced labour costs and greater savings.
Due to a skilled labour shortage in the construction industry, prefab might soon be a necessity. The 2022 Arcadis Construction Costs Index Report predicts that there will be 100,000 unfilled roles in the Australian construction industry in 2023. Prefab systems are easy to assemble and install, so less skilled labour is required on-site. Plungie pools are proof of this, as they can be installed by a home builder or owner-builder rather than a specialist pool company.
The Safe Work Australia: Construction Report found that 28% of on-site injuries were caused by falls, trips and slips. Moving construction to a factory environment mitigates the risk of these injuries by providing shelter from wet or icy weather conditions. There’s also less chance of debris being left on the factory floor that workers could trip on. On top of this, the majority of off-site construction can be done at ground level, so there’s less risk of falling from height. Learn more in our article about the Health And Safety Benefits Of Prefab Construction.
A factory environment can provide superior construction quality. With better lighting, specialised equipment and shelter from the elements, prefab companies have more control over the manufacturing process than traditional builders. There’s also more opportunity for quality assurance on the factory floor prior to shipping. Read our article, How Prefabrication Can Improve Quality In Construction, to find out more.
As much as we try to avoid it, construction sites can often cause disruption to the surrounding community — whether it’s noise pollution, litter or limited street access. The speed and simplicity of prefab construction minimises this disruption.
Of all the off-site construction benefits, reduced environmental impact is one of the most exciting. A 2022 study from the University of Cambridge and Edinburgh Napier University found that modular-constructed homes produce up to 45% fewer carbon emissions than traditional residential construction methods. Because prefab structures are manufactured with precision, they also create less material waste.
Despite the many advantages of prefab construction, there are 3 main reasons why it’s not a suitable solution for every project.
Complying with road height and width requirements can be a challenge when transporting prefab structures to their final location. This is less of a limitation for 2D prefab systems but can become difficult for large 3D prefab systems like modular homes. The larger the structure, the greater the risk of damage as it’s transported from factory to site.
This isn’t an issue with a Plungie. The Max may be the largest precast concrete pool on the market, but it still meets the relevant transport requirements to get anywhere.
Although we have our own impressive factory spaces, not all prefab companies work this way. Some companies operate out of rented factory spaces, so you may need to pay a rental fee on top of the actual prefab product cost.
You’ll also need to consider the cost of installation before starting your project. Many prefab structures (including Plungie pools) need to be lifted into place, so crane hire should be factored into your budget.
You can create cost efficiencies by installing your Plungie prior to starting construction. This allows you to utilise other trades that will be on site for the house build, including plumbers, electricians and excavator operators.
While more options for customisation are becoming available, mass production is still central to the success of prefab systems. If customisation is key to your project, prefab may not be the solution for you.
Although Plungie pools are prefabricated, it’s still possible to achieve a custom look with our four models and six interior ecoFinish colours. With other finishings such as waterline tiles, coping tiles and landscaping, you can ensure your Plungie aligns with the project’s aesthetic.
Despite these challenges, we believe prefab’s a winner. The improvements in workplace health and safety, sustainability and quality are too important to ignore. As prefab construction becomes more popular, we’re confident that companies will find innovative solutions to the current challenges in the industry. In short — keep supporting prefab!